2006 AUDIO EXCELLENCE AWARDS（JAPAN)
It is the coaxial cable made in the technology and theory of a record level at origin using high quality silver.
"FTVS-510" uses silver of the best quality for a central conductor to decrease transmission loss.The shield of three layers defends the signal from the noise, and sends a pure signal.
The design meaning offers the highest quality, even when you use by the sound and a digital (75ohms) signal cable not to mention the performance as an antenna cable (BS, CS, BS digital, Hi-Vision). And transmission of 100m or more is secured to HD signal.
5N Pure Silver Conductor5N(99.9995%) pure silver was used for the central conductor. Silver is a conductor of the ideal whose electric conductivity (silver 61e6 copper 58e6 σ S/m) is the highest in the metal. It told or the answer was "Pure silver. " it not only tied but also without deteriorating the image. The continuous casting with the furnace of the high-frequency electricity in the under of an advanced production control. cold rolling which reached as many as 19 processes . annealing work over two degrees . Only it processed pulling out with the diamond die, the skin path was processed, the purity of silver was not high, and high-quality "Silver" that there is no space in the grain boundary was used. |
InsulationThe performance and tone quality were valued and it was assumed the composite insulation layer of the Teflon (Teflon) and FPE(Foamed polyethylene). Insulating it by the Teflon assumed everything to be a composite insulation layer though dared to lower some permittivitys. To distribute the vibration by the use, the different kind material is done in above all though this also has the problem of the flexibility. |
|||||||||||||||||||||||||||
Semiconductor LayerTeflon is charged with electricity by static electricity.And it has a bad influence on a signal. We prepared the semiconductor layer in the cable and solved those problems.A semiconductor layer absorbs static electricity and discharges. |
2-Layer ShieldA shield is two-layer structure. The copper shield which prevents a low frequency noise.The silver plating shield which prevents a high frequency noise.Two shields prevent a noise of a wide band. |
|||||||||||||||||||||||||||
 |
Outer JacketEven if it uses the polyurethane coating of an ultraviolet-rays cut outdoors, it is satisfactory. |
|||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||