The premium appear on the scene.
The M1/F1 is flagship model.It evolved that followed concept of the P/C series.The oyaide made "more hi-end model"spending above a year from the plan. The latest engineering was brushed up more highly and in united various elements exquisitely.The design made the lens of the camera which caught the moment a motif.
It is an attractive design and moreover high-performance
The dual monocoque housing with Delrin and aluminum has distinguished mechanical strength.
Furthermore,
it is an excellent vibration attenuation characteristic and a low noise. The electrode part newly used the beryllium copper.We did much audition tests for plating. As a result, We chose two layer of platinum + palladium plating.
The M1/F1 was united a lot of characteristics and
held to uncompromising standards.It gives a strong impression by dynamic sound and the audience will become fascinated with the perfect sound.The M1/F1 is best power,more dynamic,graceful and the ultimate
refinements.
Housing |
||||||||||||||||
Material
|
Dual monocoque housing
|
|||||||||||||||
BODY |
||||||||||||||||
The body of F1/M1 used high engineering plastics material PBT+GF30%. The body of a high rigidity achieved the high-speed vibration attenuation. Moreover, all the screws are original made of the stainless steel. A stainless screw with a high rigidity does not have the trouble by strong torque.(Collapsing of head of a screw ,etc.) The maximum cable installation size is 10sq（5.5sq×2pieces）. Pulling strength of a blade and a cable is more than 30kg.A cable does not easily fall out. |
||||||||||||||||
BLADE |
||||||||||||||||
|
Plating ProcessWe thoroughly tested several dozen combinations of plating methods, selecting the very best, platinum + palladium, for our flagship model, the F1/M1. The first layer is 0.5 μ (microns) of Platinum, followed by the second layer of Palladium which is 0.3 μ in thickness. The initial shaping of the contact is done via an automated mill. This is followed by a manual polishing which is done before the first direct plating layer and again before the final plating. We completely make it because of simplicity. It is philosophy and a craftsman ship of Oyaide elec. |
|||||||||||||||
| This process is unique and unparalleled and achieves a mirror finish. The use of Beryllium Copper provides a high level of conductivity and at the same time a high level of mechanical integrity, both appropriate qualities for a flagship level product. Heat treatment is applied to enhance its machine-ability. Its rigidity and thickness (1.0mm thick and 6.0mm wide) increases the holding capacity of the plug to 8kg and minimizes vibrations which would otherwise degrade the transmission of energy. |  |
|||||||||||||||
|
||||||||||||||||
